Summary: Laminin B (Domain IV)
Pfam includes annotations and additional family information from a range of different sources. These sources can be accessed via the tabs below.
This is the Wikipedia entry entitled "Laminin". More...
The Wikipedia text that you see displayed here is a download from Wikipedia. This means that the information we display is a copy of the information from the Wikipedia database. The button next to the article title ("Edit Wikipedia article") takes you to the edit page for the article directly within Wikipedia. You should be aware you are not editing our local copy of this information. Any changes that you make to the Wikipedia article will not be displayed here until we next download the article from Wikipedia. We currently download new content on a nightly basis.
Does Pfam agree with the content of the Wikipedia entry ?
Pfam has chosen to link families to Wikipedia articles. In some case we have created or edited these articles but in many other cases we have not made any direct contribution to the content of the article. The Wikipedia community does monitor edits to try to ensure that (a) the quality of article annotation increases, and (b) vandalism is very quickly dealt with. However, we would like to emphasise that Pfam does not curate the Wikipedia entries and we cannot guarantee the accuracy of the information on the Wikipedia page.
Editing Wikipedia articles
Before you edit for the first time
Wikipedia is a free, online encyclopedia. Although anyone can edit or contribute to an article, Wikipedia has some strong editing guidelines and policies, which promote the Wikipedia standard of style and etiquette. Your edits and contributions are more likely to be accepted (and remain) if they are in accordance with this policy.
You should take a few minutes to view the following pages:
How your contribution will be recorded
Anyone can edit a Wikipedia entry. You can do this either as a new user or you can register with Wikipedia and log on. When you click on the "Edit Wikipedia article" button, your browser will direct you to the edit page for this entry in Wikipedia. If you are a registered user and currently logged in, your changes will be recorded under your Wikipedia user name. However, if you are not a registered user or are not logged on, your changes will be logged under your computer's IP address. This has two main implications. Firstly, as a registered Wikipedia user your edits are more likely seen as valuable contribution (although all edits are open to community scrutiny regardless). Secondly, if you edit under an IP address you may be sharing this IP address with other users. If your IP address has previously been blocked (due to being flagged as a source of 'vandalism') your edits will also be blocked. You can find more information on this and creating a user account at Wikipedia.
If you have problems editing a particular page, contact us at email@example.com and we will try to help.
The community annotation is a new facility of the Pfam web site. If you have problems editing or experience problems with these pages please contact us.
Laminin Edit Wikipedia article
Laminins are high-molecular weight (~400 to ~900 kDa) proteins of the extracellular matrix. They are a major component of the basal lamina (one of the layers of the basement membrane), a protein network foundation for most cells and organs. The laminins are an important and biologically active part of the basal lamina, influencing cell differentiation, migration, and adhesion.
Laminins are heterotrimeric proteins that contain an α-chain, a β-chain, and a γ-chain, found in five, four, and three genetic variants, respectively. The laminin molecules are named according to their chain composition. Thus, laminin-511 contains α5, β1, and γ1 chains. Fourteen other chain combinations have been identified in vivo. The trimeric proteins intersect to form a cross-like structure that can bind to other cell membrane and extracellular matrix molecules. The three shorter arms are particularly good at binding to other laminin molecules, which allows them to form sheets. The long arm is capable of binding to cells, which helps anchor organized tissue cells to the membrane.
The laminin family of glycoproteins are an integral part of the structural scaffolding in almost every tissue of an organism. They are secreted and incorporated into cell-associated extracellular matrices. Laminin is vital for the maintenance and survival of tissues. Defective laminins can cause muscles to form improperly, leading to a form of muscular dystrophy, lethal skin blistering disease (junctional epidermolysis bullosa) and defects of the kidney filter (nephrotic syndrome).
- 1 Types
- 2 Function
- 3 Pathology
- 4 Laminins in cell culture
- 5 Role in neural development
- 6 Role in cancer
- 7 Laminin domains
- 8 Human proteins containing laminin domains
- 9 See also
- 10 References
- 11 External links
Fifteen laminin trimers have been identified. The laminins are combinations of different alpha-, beta-, and gamma-chains.
- The five forms of alpha-chains are: LAMA1, LAMA2, LAMA3 (which has three splice forms), LAMA4, LAMA5
- The beta-chains include: LAMB1, LAMB2, LAMB3, LAMB4 (note that no known laminin trimer incorporates LAMB4 and its function remains poorly understood)
- The gamma-chains are: LAMC1, LAMC2, LAMC3
Laminins were previously numbered - e.g. laminin-1, laminin-2, laminin-3 - but the nomenclature was recently changed to describe which chains are present in each isoform.
|Old nomenclature||Chain composition||New nomenclature|
|Laminin-5 / Laminin-5A||α3Aβ3γ2||Laminin-332 / Laminin-3A32|
|Laminin-6 / Laminin-6A||α3Aβ1γ1||Laminin-311 / Laminin-3A11|
|Laminin-7 / Laminin-7A||α3Aβ2γ1||Laminin-321 / Laminin-3A21|
Laminins form independent networks and are associated with type IV collagen networks via entactin, fibronectin, and perlecan. They also bind to cell membranes through integrin receptors and other plasma membrane molecules, such as the dystroglycan glycoprotein complex and Lutheran blood group glycoprotein. Through these interactions, laminins critically contribute to cell attachment and differentiation, cell shape and movement, maintenance of tissue phenotype, and promotion of tissue survival. Some of these biological functions of laminin have been associated with specific amino-acid sequences or fragments of laminin. For example, the peptide sequence [GTFALRGDNGDNGQ], which is located on the alpha-chain of laminin, promotes adhesion of endothelial cells.
Laminin alpha4 is distributed in a variety of tissues including peripheral nerves, dorsal root ganglion, skeletal muscle and capillaries; in the neuromuscular junction, it is required for synaptic specialisation. The structure of the laminin-G domain has been predicted to resemble that of pentraxin.
Dysfunctional structure of one particular laminin, laminin-211, is the cause of one form of congenital muscular dystrophy. Laminin-211 is composed of an α2, a β1 and a γ1 chains. This laminin's distribution includes the brain and muscle fibers. In muscle, it binds to alpha dystroglycan and integrin alpha7—beta1 via the G domain, and via the other end binds to the extracellular matrix. Abnormal laminin-332, which is essential for epithelial cell adhesion to the basement membrane, leads to a condition called junctional epidermolysis bullosa, characterized by generalized blisters, exuberant granulation tissue of skin and mucosa, and pitted teeth. Malfunctional laminin-521 in the kidney filter causes leakage of protein into the urine and nephrotic syndrome.
Laminins in cell culture
Recently, several publications have reported that laminins can be used to culture cells, such as pluripotent stem cells, that are difficult to culture on other substrates. Mostly, two types of laminins have been used. Laminin-111 extracted from mouse sarcomas is one popular laminin type, as well as a mixture of laminins 511 and 521 from human placenta. Various laminin isoforms are practically impossible to isolate from tissues in pure form due to extensive cross-linking and the need for harsh extraction conditions, such as proteolytic enzymes or low pH, that cause degradation. However, professor Tryggvason's group at the Karolinska Institute in Sweden showed how to produce recombinant laminins using HEK293 cells in 2000. Kortesmaa et al. 2000. This made it possible to test if laminins could have a significant role in vitro as they have in the human body. In 2008, two groups independently showed that mouse embryonic stem cells can be grown for months on top of recombinant laminin-511. Later, Rodin et al. showed that recombinant laminin 511 can be used to create a totally xeno-free and defined cell culture environment to culture human pluripotent ES cells and human iPS cells.
Role in neural development
Laminin-111 is a major substrate along which nerve axons will grow, both in vivo and in vitro. For example, it lays down a path that developing retinal ganglion cells follow on their way from the retina to the tectum. It is also often used as a substrate in cell culture experiments. Interestingly, the presence of laminin-1 can influence how the growth cone responds to other cues. For example, growth cones are repelled by netrin when grown on laminin-111, but are attracted to netrin when grown on fibronectin. This effect of laminin-111 probably occurs through a lowering of intracellular cyclic AMP.
Role in cancer
||This section's tone or style may not reflect the encyclopedic tone used on Wikipedia. (July 2012) (Learn how and when to remove this template message)|
Some of the laminin isoforms have been implicated in cancer pathophysiology. The majority of transcripts that harbor an internal ribosome entry site (IRES) are involved in cancer development via corresponding proteins. A crucial event in tumor progression referred to as epithelial to mesenchymal transition (EMT) allows carcinoma cells to acquire invasive properties. The translational activation of the extracellular matrix component laminin B1 (LAMB1) during EMT has been recently reported suggesting an IRES-mediated mechanism. In this study, the IRES activity of LamB1 was determined by independent bicistronic reporter assays. Strong evidences exclude an impact of cryptic promoter or splice sites on IRES-driven translation of LamB1. Furthermore, no other LamB1 mRNA species arising from alternative transcription start sites or polyadenylation signals were detected that account for its translational control. Mapping of the LamB1 5'-untranslated region (UTR) revealed the minimal LamB1 IRES motif between -293 and -1 upstream of the start codon. Notably, RNA affinity purification showed that the La protein interacts with the LamB1 IRES. This interaction and its regulation during EMT were confirmed by ribonucleoprotein immunoprecipitation. In addition, La was able to positively modulate LamB1 IRES translation. In summary, these data indicate that the LamB1 IRES is activated by binding to La which leads to translational upregulation during hepatocellular EMT.
|Laminin Domain I|
|Laminin Domain II|
|Laminin B (Domain IV)|
|Laminin EGF-like (Domains III and V)|
crystal structure of three consecutive laminin-type epidermal growth factor-like (le) modules of laminin gamma1 chain harboring the nidogen binding site
|Laminin G domain|
laminin alpha 2 chain lg4-5 domain pair, ca1 site mutant
|Laminin G domain|
the structure of the ligand-binding domain of neurexin 1beta: regulation of lns domain function by alternative splicing
|Laminin N-terminal (Domain VI)|
Laminin I and Laminin II
Laminins are trimeric molecules; laminin-1 is an alpha1 beta1 gamma1 trimer. It has been suggested that the domains I and II from laminin A, B1 and B2 may come together to form a triple helical coiled-coil structure.
The laminin B domain (also known as domain IV) is an extracellular module of unknown function. It is found in a number of different proteins that include, heparan sulphate proteoglycan from basement membrane, a laminin-like protein from Caenorhabditis elegans and laminin. Laminin IV domain is not found in short laminin chains (alpha4 or beta3).
Beside different types of globular domains each laminin subunit contains, in its first half, consecutive repeats of about 60 amino acids in length that include eight conserved cysteines. The tertiary structure of this domain is remotely similar in its N-terminus to that of the EGF-like module. It is also known as a 'LE' or 'laminin-type EGF-like' domain. The number of copies of the laminin EGF-like domain in the different forms of laminins is highly variable; from 3 up to 22 copies have been found. In mouse laminin gamma-1 chain, the seventh LE domain has been shown to be the only one that binds with a high affinity to nidogen. The binding-sites are located on the surface within the loops C1-C3 and C5-C6. Long consecutive arrays of laminin EGF-like domains in laminins form rod-like elements of limited flexibility, which determine the spacing in the formation of laminin networks of basement membranes.
The laminin globular (G) domain, also known as the LNS (Laminin-alpha, Neurexin and Sex hormone-binding globulin) domain, is on average 177 amino acids in length and can be found in one to six copies in various laminin family members as well as in a large number of other extracellular proteins. For example, all laminin alpha-chains have five laminin G domains, all collagen family proteins have one laminin G domain, the CNTNAP proteins have four laminin G domains, while neurexin 1 and 2 each hold six laminin G domains. On average, approximately one quarter of the proteins that hold laminin G domains is taken up by these laminin G domains themselves. The smallest laminin G domain can be found in one of the collagen proteins (COL24A1; 77 AA) and the largest domain in TSPEAR (219 AA).
The exact function of the Laminin G domains has remained elusive, and a variety of binding functions has been ascribed to different Laminin G modules. For example, the laminin alpha1 and alpha2 chains each have five C-terminal laminin G domains, where only domains LG4 and LG5 contain binding sites for heparin, sulphatides and the cell surface receptor dystroglycan. Laminin G-containing proteins appear to have a wide variety of roles in cell adhesion, signalling, migration, assembly and differentiation.
Basement membrane assembly is a cooperative process in which laminins polymerise through their N-terminal domain (LN or domain VI) and anchor to the cell surface through their G domains. Netrins may also associate with this network through heterotypic LN domain interactions. This leads to cell signalling through integrins and dystroglycan (and possibly other receptors) recruited to the adherent laminin. This LN domain-dependent self-assembly is considered to be crucial for the integrity of basement membranes, as highlighted by genetic forms of muscular dystrophy containing the deletion of the LN module from the alpha 2 laminin chain. The laminin N-terminal domain is found in all laminin and netrin subunits except laminin alpha 3A, alpha 4 and gamma 2.
Human proteins containing laminin domains
Laminin Domain I
Laminin Domain II
Laminin B (Domain IV)
Laminin EGF-like (Domains III and V)
AGRIN; ATRN; ATRNL1; CELSR1; CELSR2; CELSR3; CRELD1; HSPG2; LAMA1; LAMA2; LAMA3; LAMA4; LAMA5; LAMB1; LAMB2; LAMB3; LAMB4; LAMC1; LAMC2; LAMC3; MEGF10; MEGF12; MEGF6; MEGF8; MEGF9; NSR1; NTN1; NTN2L; NTN4; NTNG1; NTNG2; RESDA1; SCARF1; SCARF2; SREC; STAB1; USH2A;
Laminin G domain
AGRIN; CELSR1; CELSR2; CELSR3; CNTNAP1; CNTNAP2; CNTNAP3; CNTNAP3B; CNTNAP4; CNTNAP5; COL11A1; COL11A2; COL12A1; COL14A1; COL15A1; COL16A1; COL18A1; COL19A1; COL20A1; COL21A1; COL22A1; COL24A1; COL27A1; COL5A1; COL5A3; COL9A1; CRB1; CRB2; CSPG4; EGFLAM; EYS; FAT; FAT2; FAT3; FAT4; GAS6; HSPG2; LAMA1; LAMA2; LAMA3; LAMA4; LAMA5; NELL1; NELL2; NRXN1; NRXN2; NRXN3; PROS1; SLIT1; SLIT2; SLIT3; SPEAR; THBS1; THBS2; THBS3; THBS4; USH2A;
Laminin N-terminal (Domain VI)
- Timpl R, et al. (1979). "Laminin – a glycoprotein from basement membranes". J Biol Chem. 254 (19): 9933–7. PMID 114518.
- DOI 10.1007/s00441-009-0838-2
- Aumailley M, et al. (2005). "A simplified laminin nomenclature". Matrix Biol. 24 (5): 326–32. doi:10.1016/j.matbio.2005.05.006. PMID 15979864.
- M. A. Haralson; John R. Hassell (1995). Extracellular matrix: a practical approach. Ithaca, N.Y: IRL Press. ISBN 0-19-963220-0.
- Yurchenko P, Batton BL (2009). "Developmental and Pathogenic Mechanisms of Basement Membrane Assembly". Curr Pharm Des. 15 (12): 1277–94. doi:10.2174/138161209787846766. PMC . PMID 19355968.
- Colognato H, Yurchenco P (2000). "Form and function: the laminin family of heterotrimers". Dev. Dyn. 218 (2): 213–34. doi:10.1002/(SICI)1097-0177(200006)218:2<213::AID-DVDY1>3.0.CO;2-R. PMID 10842354.
- Smith J, Ockleford CD (January 1994). "Laser scanning confocal examination and comparison of nidogen (entactin) with laminin in term human amniochorion". Placenta. 15 (1): 95–106. doi:10.1016/S0143-4004(05)80240-1. PMID 8208674.
- Ockleford CD, Bright N, Hubbard A, D'Lacey C , Smith J, Gardiner L, Sheikh T, Albentosa, M, Turtle K (October 1993). "Micro-Trabeculae, Macro-Plaques or Mini-Basement Membranes in Human Term Fetal Membranes?". Phil. Trans. R. Soc. Lond. B. 342 (1300): 121–136. doi:10.1098/rstb.1993.0142.
- Beck et al., 1999.[specify]
- Ichikawa N, Kasai S, Suzuki N, Nishi N, Oishi S, Fujii N, Kadoya Y, Hatori K, Mizuno Y, Nomizu M, Arikawa-Hirasawa E (April 2005). "Identification of neurite outgrowth active sites on the laminin alpha4 chain G domain". Biochemistry. 44 (15): 5755–62. doi:10.1021/bi0476228. PMID 15823034.
- Beckmann G, Hanke J, Bork P, Reich JG (February 1998). "Merging extracellular domains: fold prediction for laminin G-like and amino-terminal thrombospondin-like modules based on homology to pentraxins". J. Mol. Biol. 275 (5): 725–30. doi:10.1006/jmbi.1997.1510. PMID 9480764.
- Hall, T. E.; Bryson-Richardson, RJ; et al. (2007). "The zebrafish candyfloss mutant implicates extracellular matrix adhesion failure in laminin α2-deficient congenital muscular dystrophy". PNAS. 104 (17): 7092–7097. doi:10.1073/pnas.0700942104. PMC . PMID 17438294.
- Wewer; et al. (1983). "Human laminin isolated in a nearly intact, biologically active form from placenta by limited proteolysis". J Biol Chem. 258 (20): 12654–60. PMID 6415055.
- Domogatskaya; et al. (2008). "Laminin-511 but not -332, -111, or -411 enables mouse embryonic stem cell self-renewal in vitro". Stem Cells. 26 (11): 2800–9. doi:10.1634/stemcells.2007-0389. PMID 18757303.
- Miyakzaki; et al. (2008). "Recombinant human laminin isoforms can support the undifferentiated growth of human embryonic stem cells". Biochem. Biophys. Res. Commun. 375 (1): 27–32. doi:10.1016/j.bbrc.2008.07.111. PMID 18675790.
- Petz M, Them N, Huber H, Beug H, Mikulits W (October 2011). "La enhances IRES-mediated translation of laminin B1 during malignant epithelial to mesenchymal transition.". Nucleic Acids Research. 40 (1): 290–302. doi:10.1093/nar/gkr717. PMC . PMID 21896617.
- Sasaki M, Kleinman HK, Huber H, Deutzmann R, Yamada Y (November 1988). "Laminin, a multidomain protein. The A chain has a unique globular domain and homology with the basement membrane proteoglycan and the laminin B chains". J. Biol. Chem. 263 (32): 16536–44. PMID 3182802.
- Engel J (July 1989). "EGF-like domains in extracellular matrix proteins: localized signals for growth and differentiation?". FEBS Lett. 251 (1-2): 1–7. doi:10.1016/0014-5793(89)81417-6. PMID 2666164.
- Stetefeld J, Mayer U, Timpl R, Huber R (April 1996). "Crystal structure of three consecutive laminin-type epidermal growth factor-like (LE) modules of laminin gamma1 chain harboring the nidogen binding site". J. Mol. Biol. 257 (3): 644–57. doi:10.1006/jmbi.1996.0191. PMID 8648630.
- Baumgartner R, Czisch M, Mayer U, Poschl E, Huber R, Timpl R, Holak TA (April 1996). "Structure of the nidogen binding LE module of the laminin gamma1 chain in solution". J. Mol. Biol. 257 (3): 658–68. doi:10.1006/jmbi.1996.0192. PMID 8648631.
- Mayer U, Poschl E, Gerecke DR, Wagman DW, Burgeson RE, Timpl R (May 1995). "Low nidogen affinity of laminin-5 can be attributed to two serine residues in EGF-like motif gamma 2III4". FEBS Lett. 365 (2-3): 129–32. doi:10.1016/0014-5793(95)00438-F. PMID 7781764.
- Beck K, Hunter I, Engel J (February 1990). "Structure and function of laminin: anatomy of a multidomain glycoprotein". FASEB J. 4 (2): 148–60. PMID 2404817.
- Yurchenco PD, Cheng YS (August 1993). "Self-assembly and calcium-binding sites in laminin. A three-arm interaction model". J. Biol. Chem. 268 (23): 17286–99. PMID 8349613.
- "Laminin G domain". InterPro. European Bioinformatics Institute. Retrieved 22 February 2016.
- Tisi D, Talts JF, Timpl R, Hohenester E (April 2000). "Structure of the C-terminal laminin G-like domain pair of the laminin alpha2 chain harbouring binding sites for alpha-dystroglycan and heparin". EMBO J. 19 (7): 1432–40. doi:10.1093/emboj/19.7.1432. PMC . PMID 10747011.
- Xu H, Wu XR, Wewer UM, Engvall E (November 1994). "Murine muscular dystrophy caused by a mutation in the laminin alpha 2 (Lama2) gene". Nat. Genet. 8 (3): 297–302. doi:10.1038/ng1194-297. PMID 7874173.
This tab holds the annotation information that is stored in the Pfam database. As we move to using Wikipedia as our main source of annotation, the contents of this tab will be gradually replaced by the Wikipedia tab.
Laminin B (Domain IV) Provide feedback
No Pfam abstract.
This tab holds annotation information from the InterPro database.
InterPro entry IPR000034
Laminin is a large molecular weight glycoprotein present only in basement membranes in almost every animal tissue. Each laminin is a heterotrimer assembled from alpha, beta and gamma chain subunits, secreted and incorporated into cell-associated extracellular matrices. The laminins can self-assemble, bind to other matrix macromolecules, and have unique and shared cell interactions mediated by integrins, dystroglycan, and other receptors. Through these interactions, laminins critically contribute to cell differentiation, shape and movement, maintenance of tissue phenotypes, and promotion of tissue survival [PUBMED:10842354, PUBMED:15363809].
The different laminin chains share a 600-residue domain I/II which oligomerises into a rod-like coiled-coil structure forming the long arm of laminins. The N-terminal short arms consist of rod-like elements (domain III and V) formed by tandem arrays of laminin-type EGF modules and several globular domains: domains IV and domain VI (laminin N-terminal). All alpha chains share a unique C-terminal G domain which consists of five laminin G modules [PUBMED:3182802]. Laminin IV domain is also found in the perlecan protein, an integral component of basement membranes, which serves also as an attachment substrate for cells, but it is not found in short laminin chains (alpha4 or beta3). The function of this domain is not yet known.
Below is a listing of the unique domain organisations or architectures in which this domain is found. More...
The graphic that is shown by default represents the longest sequence with a given architecture. Each row contains the following information:
- the number of sequences which exhibit this architecture
a textual description of the architecture, e.g. Gla, EGF x 2, Trypsin.
This example describes an architecture with one
Gladomain, followed by two consecutive
EGFdomains, and finally a single
- a link to the page in the Pfam site showing information about the sequence that the graphic describes
- the UniProt description of the protein sequence
- the number of residues in the sequence
- the Pfam graphic itself.
Note that you can see the family page for a particular domain by clicking on the graphic. You can also choose to see all sequences which have a given architecture by clicking on the Show link in each row.
Finally, because some families can be found in a very large number of architectures, we load only the first fifty architectures by default. If you want to see more architectures, click the button at the bottom of the page to load the next set.
Loading domain graphics...
We store a range of different sequence alignments for families. As well as the seed alignment from which the family is built, we provide the full alignment, generated by searching the sequence database (reference proteomes) using the family HMM. We also generate alignments using four representative proteomes (RP) sets, the UniProtKB sequence database, the NCBI sequence database, and our metagenomics sequence database. More...
There are various ways to view or download the sequence alignments that we store. We provide several sequence viewers and a plain-text Stockholm-format file for download.
We make a range of alignments for each Pfam-A family:
- the curated alignment from which the HMM for the family is built
- the alignment generated by searching the sequence database using the HMM
- Representative Proteomes (RPs) at 15%, 35%, 55% and 75% co-membership thresholds
- alignment generated by searching the UniProtKB sequence database using the family HMM
- alignment generated by searching the NCBI sequence database using the family HMM
- alignment generated by searching the metagenomics sequence database using the family HMM
You can see the alignments as HTML or in three different sequence viewers:
- a Java applet developed at the University of Dundee. You will need Java installed before running jalview
- an HTML page showing the whole alignment.Please note: full Pfam alignments can be very large. These HTML views are extremely large and often cause problems for browsers. Please use either jalview or the Pfam viewer if you have trouble viewing the HTML version
- an HTML-based representation of the alignment, coloured according to the posterior-probability (PP) values from the HMM. As for the standard HTML view, heatmap alignments can also be very large and slow to render.
You can download (or view in your browser) a text representation of a Pfam alignment in various formats:
You can also change the order in which sequences are listed in the alignment, change how insertions are represented, alter the characters that are used to represent gaps in sequences and, finally, choose whether to download the alignment or to view it in your browser directly.
You may find that large alignments cause problems for the viewers and the reformatting tool, so we also provide all alignments in Stockholm format. You can download either the plain text alignment, or a gzipped version of it.
We make a range of alignments for each Pfam-A family. You can see a description of each above. You can view these alignments in various ways but please note that some types of alignment are never generated while others may not be available for all families, most commonly because the alignments are too large to handle.
1Cannot generate PP/Heatmap alignments for seeds; no PP data available
Key: available, not generated, — not available.
Format an alignment
We make all of our alignments available in Stockholm format. You can download them here as raw, plain text files or as gzip-compressed files.
You can also download a FASTA format file containing the full-length sequences for all sequences in the full alignment.
HMM logos is one way of visualising profile HMMs. Logos provide a quick overview of the properties of an HMM in a graphical form. You can see a more detailed description of HMM logos and find out how you can interpret them here. More...
If you find these logos useful in your own work, please consider citing the following article:
This page displays the phylogenetic tree for this family's seed alignment. We use FastTree to calculate neighbour join trees with a local bootstrap based on 100 resamples (shown next to the tree nodes). FastTree calculates approximately-maximum-likelihood phylogenetic trees from our seed alignment.
Note: You can also download the data file for the tree.
Curation and family details
This section shows the detailed information about the Pfam family. You can see the definitions of many of the terms in this section in the glossary and a fuller explanation of the scoring system that we use in the scores section of the help pages.
|Number in seed:||297|
|Number in full:||1548|
|Average length of the domain:||134.00 aa|
|Average identity of full alignment:||27 %|
|Average coverage of the sequence by the domain:||8.56 %|
|HMM build commands:||
build method: hmmbuild -o /dev/null HMM SEED
search method: hmmsearch -Z 17690987 -E 1000 --cpu 4 HMM pfamseq
|Family (HMM) version:||16|
|Download:||download the raw HMM for this family|
Weight segments by...
Change the size of the sunburst
selected sequences to HMM
a FASTA-format file
- 0 sequences
- 0 species
This visualisation provides a simple graphical representation of the distribution of this family across species. You can find the original interactive tree in the More....
This chart is a modified "sunburst" visualisation of the species tree for this family. It shows each node in the tree as a separate arc, arranged radially with the superkingdoms at the centre and the species arrayed around the outermost ring.
How the sunburst is generated
The tree is built by considering the taxonomic lineage of each sequence that has a match to this family. For each node in the resulting tree, we draw an arc in the sunburst. The radius of the arc, its distance from the root node at the centre of the sunburst, shows the taxonomic level ("superkingdom", "kingdom", etc). The length of the arc represents either the number of sequences represented at a given level, or the number of species that are found beneath the node in the tree. The weighting scheme can be changed using the sunburst controls.
In order to reduce the complexity of the representation, we reduce the number of taxonomic levels that we show. We consider only the following eight major taxonomic levels:
Colouring and labels
Segments of the tree are coloured approximately according to their superkingdom. For example, archeal branches are coloured with shades of orange, eukaryotes in shades of purple, etc. The colour assignments are shown under the sunburst controls. Where space allows, the name of the taxonomic level will be written on the arc itself.
As you move your mouse across the sunburst, the current node will be highlighted. In the top section of the controls panel we show a summary of the lineage of the currently highlighed node. If you pause over an arc, a tooltip will be shown, giving the name of the taxonomic level in the title and a summary of the number of sequences and species below that node in the tree.
Anomalies in the taxonomy tree
There are some situations that the sunburst tree cannot easily handle and for which we have work-arounds in place.
Missing taxonomic levels
Some species in the taxonomic tree may not have one or more of the main eight levels that we display. For example, Bos taurus is not assigned an order in the NCBI taxonomic tree. In such cases we mark the omitted level with, for example, "No order", in both the tooltip and the lineage summary.
Unmapped species names
The tree is built by looking at each sequence in the full alignment for the family. We take the name of the species given by UniProt and try to map that to the full taxonomic tree from NCBI. In some cases, the name chosen by UniProt does not map to any node in the NCBI tree, perhaps because the chosen name is listed as a synonym or a misspelling in the NCBI taxonomy.
So that these nodes are not simply omitted from the sunburst tree, we group them together in a separate branch (or segment of the sunburst tree). Since we cannot determine the lineage for these unmapped species, we show all levels between the superkingdom and the species as "uncategorised".
Since we reduce the species tree to only the eight main taxonomic levels, sequences that are mapped to the sub-species level in the tree would not normally be shown. Rather than leave out these species, we map them instead to their parent species. So, for example, for sequences belonging to one of the Vibrio cholerae sub-species in the NCBI taxonomy, we show them instead as belonging to the species Vibrio cholerae.
Too many species/sequences
For large species trees, you may see blank regions in the outer layers of the sunburst. These occur when there are large numbers of arcs to be drawn in a small space. If an arc is less than approximately one pixel wide, it will not be drawn and the space will be left blank. You may still be able to get some information about the species in that region by moving your mouse across the area, but since each arc will be very small, it will be difficult to accurately locate a particular species.
The tree shows the occurrence of this domain across different species. More...
We show the species tree in one of two ways. For smaller trees we try to show an interactive representation, which allows you to select specific nodes in the tree and view them as an alignment or as a set of Pfam domain graphics.
Unfortunately we have found that there are problems viewing the interactive tree when the it becomes larger than a certain limit. Furthermore, we have found that Internet Explorer can become unresponsive when viewing some trees, regardless of their size. We therefore show a text representation of the species tree when the size is above a certain limit or if you are using Internet Explorer to view the site.
If you are using IE you can still load the interactive tree by clicking the "Generate interactive tree" button, but please be aware of the potential problems that the interactive species tree can cause.
For all of the domain matches in a full alignment, we count the number that are found on all sequences in the alignment. This total is shown in the purple box.
We also count the number of unique sequences on which each domain is found, which is shown in green. Note that a domain may appear multiple times on the same sequence, leading to the difference between these two numbers.
Finally, we group sequences from the same organism according to the NCBI code that is assigned by UniProt, allowing us to count the number of distinct sequences on which the domain is found. This value is shown in the pink boxes.
We use the NCBI species tree to group organisms according to their taxonomy and this forms the structure of the displayed tree. Note that in some cases the trees are too large (have too many nodes) to allow us to build an interactive tree, but in most cases you can still view the tree in a plain text, non-interactive representation. Those species which are represented in the seed alignment for this domain are highlighted.
You can use the tree controls to manipulate how the interactive tree is displayed:
- show/hide the summary boxes
- highlight species that are represented in the seed alignment
- expand/collapse the tree or expand it to a given depth
- select a sub-tree or a set of species within the tree and view them graphically or as an alignment
- save a plain text representation of the tree
Please note: for large trees this can take some time. While the tree is loading, you can safely switch away from this tab but if you browse away from the family page entirely, the tree will not be loaded.
For those sequences which have a structure in the Protein DataBank, we use the mapping between UniProt, PDB and Pfam coordinate systems from the PDBe group, to allow us to map Pfam domains onto UniProt sequences and three-dimensional protein structures. The table below shows the structures on which the Laminin_B domain has been found. There are 3 instances of this domain found in the PDB. Note that there may be multiple copies of the domain in a single PDB structure, since many structures contain multiple copies of the same protein seqence.
Loading structure mapping...